Corrosion Resistant
Suitable for marine, wastewater, chemical, mining and coastal environments where metallic systems may corrode.
DMTRAY™ | FRP Cable Management Systems
DMTRAY™ is DM Composites' range of engineered FRP cable trays, cable ladders and cable-management systems for electrical, industrial, infrastructure, marine, mining, water and wastewater applications across Australia and New Zealand.
What is FRP Cable Tray?
FRP cable tray is a composite cable-support system manufactured using glass fibre reinforcement and engineered polymer resin systems. The system can be coordinated with FRP structural profiles where appropriate.
It is used to support, route and protect electrical power, control, instrumentation, communications and other cabling.
Unlike conventional metallic cable trays, FRP provides inherent corrosion resistance without relying on galvanising or conventional protective coatings.
DMTRAY™ is available as both FRP cable ladder and FRP cable tray systems, allowing selection according to cable loading, ventilation, support span and project requirements.

Why Choose DMTRAY™?
DMTRAY™ combines the material advantages of FRP with a complete cable-management range for industrial, electrical, marine and infrastructure applications.
Suitable for marine, wastewater, chemical, mining and coastal environments where metallic systems may corrode.
Standard DMTRAY™ FRP systems are electrically non-conductive, with specialised conductive resin systems also available where required.
Lower component weight can simplify transport, elevated installation, retrofit work and installation in congested plants.
Multiple ladder depths and NEMA load classes allow the support system to be matched to working loads and spans.
Systems are available with self-extinguishing characteristics and documented AS 1530.3 fire-performance testing.
Bends, tees, crosses, reducers, covers, splice plates, clamps, wireways and supports provide a coordinated package.
AS/NZS 3013:2005
Where DMTRAY™ is proposed as part of a fire-rated cable-support system, the complete installation must correspond with the applicable tested or certified configuration.
Fire performance depends on the complete system rather than FRP material in isolation. Project-specific engineering review is important.

NEMA FG 1 Cable Ladder Classes
NEMA FG 1 classifications provide a recognised basis for specifying fibreglass cable tray systems according to structural working load and support span.
| DMTRAY™ | Ladder Height | Thickness | NEMA Class | Published Working Load |
|---|---|---|---|---|
| DMTY-75 | 75 mm | 4.8 mm | 8A / FG1 | 74 kg/m @ 2.4 m span |
| DMTY-100 | 100 mm | 6.4 mm | 12C / FG1 | 148 kg/m @ 3.7 m span |
| DMTY-152 | 152 mm | 6.4 mm | 20C / FG1 | 49 kg/m @ 6.0 m span |
| DMTY-203 | 203 mm | 9.5 mm | 20C / FG1 | 149 kg/m @ 6.0 m span |
| DMTY-254 | 254 mm | 9.5 mm | 30C / FG1 | 149 kg/m @ 9.0 m span |
The appropriate class should be selected using the applicable NEMA FG 1 requirements, actual cable loading, required support spacing and project specification.
DMTRAY™ Product Range
Select between open ladder systems and solid or perforated cable trays according to cable loading, ventilation, support, enclosure and project requirements.

Open cable-support systems for applications requiring effective support, ventilation and accessibility.

Solid and perforated FRP cable trays for applications requiring greater cable enclosure or continuous support.
Resin Systems
DMTRAY™ offers multiple resin formulations for different chemical, environmental, electrical and fire/smoke requirements.
Industrial-grade weathering and corrosion resistance for broad industrial and outdoor exposure.
Increased corrosion resistance for demanding chemical and elevated-temperature environments.
Specialised FRP system for applications where conductivity is specifically required.
Option for projects where specifications restrict halogen-containing materials.
Specialised system for applications where minimising smoke generation is particularly important.
FRP Cable Tray Applications
DMTRAY™ can be configured around loading, environmental exposure, support requirements and the project cable route.

For treatment plants, pump stations, reservoirs, desalination infrastructure, dosing areas and external cable routes.

Suitable for appropriately specified ports, wharves, jetties, marine facilities and waterfront infrastructure.
Explore DMMARINE™
For processing plants, mining facilities, power infrastructure, chemical processing and plant upgrades.

UV-resistant systems for external cable routes, utilities, power infrastructure and exposed installations.
Complete FRP Fitting System
DMTRAY™ includes moulded and mechanically fabricated fittings for complex industrial cable routes.

Horizontal bends, vertical inside and outside bends, reducers, adjustable fittings, drop-outs and other cable-routing accessories.

Tees, crosses, transitions and custom geometry allow DMTRAY™ to operate as a coordinated routing system.
Multiple angles and radii for changes in horizontal cable direction.
Controlled vertical cable transitions.
Three-way and four-way intersections for complex cable routes.
Transitions between different cable tray widths.
Project-specific fittings for non-standard routes.
Controlled entry, exit and termination points.

Splice Plates & Connections
Available options include straight, expansion, vertical, horizontal, adjustable and heavy-duty splice plates.
Standard DMTRAY™ splice plates are available in both FRP and 316 stainless steel, allowing connection materials to be selected according to structural, environmental and project requirements.
FRP Cable Tray Support Systems
DMTRAY™ support components are designed to create a coordinated cable-support system, including appropriate structural supports.

FRP vs Galvanised Steel
Material selection should consider environment, electrical requirements, cable loads, support spans, fire requirements, installation and whole-of-life maintenance.
| Feature | DMTRAY™ FRP | Galvanised Steel |
|---|---|---|
| Corrosion resistance | Inherent | Relies significantly on protective zinc coating |
| Electrical conductivity | Non-conductive as standard | Conductive |
| Weight | Lightweight | Heavier |
| Coastal environments | Well suited with correct resin selection | Requires corrosion assessment |
| Chemical environments | Multiple resin systems available | Chemical compatibility dependent |
| Maintenance | Low corrosion-related maintenance | Coating deterioration may require attention |
| NEMA load classes | Available | Available depending on system |
| Fire-rated systems | Project/system dependent | Project/system dependent |
| Custom fittings | Available | Available |
Standards, Compliance & Testing
Compliance depends on the selected DMTRAY™ configuration and project requirements.
Fire-rated cable-support configurations should be assessed against the applicable tested system and installation arrangement.
DMTRAY™ cable ladders are available in multiple structural classifications including 8A/FG1, 12C/FG1, 20C/FG1 and 30C/FG1.
Current DMTRAY™ documentation identifies cable ladders as tested for fire-related performance and describes the product as self-extinguishing.
Choosing the Correct DMTRAY™ System
DM Composites can review cable tray schedules, layout drawings and specifications to assist with selection of the appropriate configuration.
Complete Cable Management Packages
DMTRAY™ can be supplied as a coordinated package incorporating cable supports, fittings, accessories and project-specific components.

Technical Support
Available documentation can include the DMTRAY™ Product Guide, NEMA FG 1 classifications, load and span tables, dimensions, resin-system information, fire documentation, fitting drawings, splice-plate details, supports and accessories.
Frequently Asked Questions
Common questions about NEMA classes, fire performance, resin systems, coastal use and cable-management configurations.
FRP cable tray is a cable-support system manufactured from Fibre Reinforced Polymer and used to support and route electrical, control, instrumentation and communications cabling.
Cable ladder uses side rails connected by spaced rungs for ventilation and access, while cable tray provides a more continuous support surface in solid or perforated form.
NEMA FG 1 is a standard addressing fiberglass cable tray systems. DMTRAY™ cable ladders are available in multiple NEMA FG 1 classifications.
The current range includes 8A/FG1, 12C/FG1, 20C/FG1 and 30C/FG1 cable ladder configurations.
DMTRAY™ has fire-performance options and supporting documentation depending on the selected system and resin configuration. Where AS/NZS 3013:2005 is required, the complete tested or certified configuration must be reviewed.
Standard FRP systems are electrically non-conductive. A specialised conductive resin system is also available where conductivity is specifically required.
Yes, appropriately specified FRP is particularly useful in coastal and marine environments because of its inherent corrosion resistance.
Yes. DMTRAY™ provides moulded and mechanically fabricated fittings, including custom and adjustable bends for project-specific cable routes.
Need FRP Cable Tray for Your Project?
Our team can review cable loads, widths, support spans, environmental conditions, fire requirements and project specifications to assist with selection of an appropriate DMTRAY™ system.
Enter your company details to access this resource.