Different FRP cable tray and cable ladder profiles stacked

DMTRAY™ | FRP Cable Management Systems

FRP Cable Tray & Cable Ladder Systems

DMTRAY™ is DM Composites' range of engineered FRP cable trays, cable ladders and cable-management systems for electrical, industrial, infrastructure, marine, mining, water and wastewater applications across Australia and New Zealand.

What is FRP Cable Tray?

Composite cable support for demanding electrical environments.

FRP cable tray is a composite cable-support system manufactured using glass fibre reinforcement and engineered polymer resin systems. The system can be coordinated with FRP structural profiles where appropriate.

It is used to support, route and protect electrical power, control, instrumentation, communications and other cabling.

Unlike conventional metallic cable trays, FRP provides inherent corrosion resistance without relying on galvanising or conventional protective coatings.

DMTRAY™ is available as both FRP cable ladder and FRP cable tray systems, allowing selection according to cable loading, ventilation, support span and project requirements.

FRP cable tray exposed in an industrial cable-management installation

Why Choose DMTRAY™?

FRP cable-management systems engineered for aggressive environments.

DMTRAY™ combines the material advantages of FRP with a complete cable-management range for industrial, electrical, marine and infrastructure applications.

02

Electrically Non-Conductive

Standard DMTRAY™ FRP systems are electrically non-conductive, with specialised conductive resin systems also available where required.

03

Lightweight

Lower component weight can simplify transport, elevated installation, retrofit work and installation in congested plants.

04

High Strength-to-Weight

Multiple ladder depths and NEMA load classes allow the support system to be matched to working loads and spans.

05

Fire Performance Options

Systems are available with self-extinguishing characteristics and documented AS 1530.3 fire-performance testing.

06

Complete System

Bends, tees, crosses, reducers, covers, splice plates, clamps, wireways and supports provide a coordinated package.

AS/NZS 3013:2005

Fire-rated cable-support configurations for essential electrical services.

Where DMTRAY™ is proposed as part of a fire-rated cable-support system, the complete installation must correspond with the applicable tested or certified configuration.

Fire performance depends on the complete system rather than FRP material in isolation. Project-specific engineering review is important.

Cable Support Type
Support Spacing
Fixing Arrangement
Support Structure
Cable Loading
FRP cable tray support system installed on an industrial platform

NEMA FG 1 Cable Ladder Classes

Select cable ladders by working load and support span.

NEMA FG 1 classifications provide a recognised basis for specifying fibreglass cable tray systems according to structural working load and support span.

DMTRAY™Ladder HeightThicknessNEMA ClassPublished Working Load
DMTY-7575 mm4.8 mm8A / FG174 kg/m @ 2.4 m span
DMTY-100100 mm6.4 mm12C / FG1148 kg/m @ 3.7 m span
DMTY-152152 mm6.4 mm20C / FG149 kg/m @ 6.0 m span
DMTY-203203 mm9.5 mm20C / FG1149 kg/m @ 6.0 m span
DMTY-254254 mm9.5 mm30C / FG1149 kg/m @ 9.0 m span

The appropriate class should be selected using the applicable NEMA FG 1 requirements, actual cable loading, required support spacing and project specification.

DMTRAY™ Product Range

Cable ladders and cable trays for different support and enclosure requirements.

Select between open ladder systems and solid or perforated cable trays according to cable loading, ventilation, support, enclosure and project requirements.

Industrial FRP cable ladder system
01 / Cable Ladder

FRP Cable Ladder Range

Open cable-support systems for applications requiring effective support, ventilation and accessibility.

  • 75–254 mm Heights
  • 150–900 mm Widths
  • 150–470 mm Rung Spacing
  • 8A / 12C / 20C / 30C
Stacked FRP cable tray sections
02 / Cable Tray

FRP Cable Tray Range

Solid and perforated FRP cable trays for applications requiring greater cable enclosure or continuous support.

  • 51 × 25 mm
  • 76 × 25 mm
  • 102 × 35 mm
  • 152 × 41 mm
  • 203 × 44 mm
  • 254 × 70 mm

Resin Systems

Select the FRP system for the actual operating environment.

DMTRAY™ offers multiple resin formulations for different chemical, environmental, electrical and fire/smoke requirements.

01

Isophthalic Polyester

Industrial-grade weathering and corrosion resistance for broad industrial and outdoor exposure.

02

Vinyl Ester

Increased corrosion resistance for demanding chemical and elevated-temperature environments.

03

Conductive Resin

Specialised FRP system for applications where conductivity is specifically required.

04

Halogen-Free Polyester

Option for projects where specifications restrict halogen-containing materials.

05

Halogen-Free Low Smoke Plus

Specialised system for applications where minimising smoke generation is particularly important.

FRP Cable Tray Applications

Cable-management systems for corrosive, industrial and infrastructure environments.

DMTRAY™ can be configured around loading, environmental exposure, support requirements and the project cable route.

FRP cable trays in underground infrastructure
01 / Water & Wastewater

Water & Wastewater

For treatment plants, pump stations, reservoirs, desalination infrastructure, dosing areas and external cable routes.

FRP cable tray within marine infrastructure
02 / Marine

Marine & Coastal Infrastructure

Suitable for appropriately specified ports, wharves, jetties, marine facilities and waterfront infrastructure.

Explore DMMARINE™
Industrial FRP cable management system
03 / Industrial

Mining & Industrial Facilities

For processing plants, mining facilities, power infrastructure, chemical processing and plant upgrades.

Outdoor FRP cable tray installation
04 / Outdoor

Outdoor & Utility Infrastructure

UV-resistant systems for external cable routes, utilities, power infrastructure and exposed installations.

Complete FRP Fitting System

Route cables through bends, branches, intersections and changing tray widths.

DMTRAY™ includes moulded and mechanically fabricated fittings for complex industrial cable routes.

FRP cable tray fittings and accessories

Cable Tray Fittings & Accessories

Horizontal bends, vertical inside and outside bends, reducers, adjustable fittings, drop-outs and other cable-routing accessories.

FRP cable tray system layout showing junctions

Cable Tray System Layout & Junctions

Tees, crosses, transitions and custom geometry allow DMTRAY™ to operate as a coordinated routing system.

Horizontal Routing

Horizontal Bends

Multiple angles and radii for changes in horizontal cable direction.

Vertical Routing

Inside & Outside Bends

Controlled vertical cable transitions.

Branching

Tees & Crosses

Three-way and four-way intersections for complex cable routes.

Width Transition

Reducers

Transitions between different cable tray widths.

Custom Geometry

Adjustable & Custom Bends

Project-specific fittings for non-standard routes.

Routing

Drop-Outs & Blind Ends

Controlled entry, exit and termination points.

FRP cable tray splice plates and connection details

Splice Plates & Connections

Connection systems for joining, expansion and directional change.

Available options include straight, expansion, vertical, horizontal, adjustable and heavy-duty splice plates.

Standard DMTRAY™ splice plates are available in both FRP and 316 stainless steel, allowing connection materials to be selected according to structural, environmental and project requirements.

FRP Cable Tray Support Systems

The tray and the supporting system must work together.

DMTRAY™ support components are designed to create a coordinated cable-support system, including appropriate structural supports.

Wall-Mounted Routes
Suspended Systems
Vertical Supports
Horizontal Supports
Multiple-Tier Trays
FRP cable tray management and support arrangement

FRP vs Galvanised Steel

Compare material behaviour before selecting the cable-support system.

Material selection should consider environment, electrical requirements, cable loads, support spans, fire requirements, installation and whole-of-life maintenance.

FeatureDMTRAY™ FRPGalvanised Steel
Corrosion resistanceInherentRelies significantly on protective zinc coating
Electrical conductivityNon-conductive as standardConductive
WeightLightweightHeavier
Coastal environmentsWell suited with correct resin selectionRequires corrosion assessment
Chemical environmentsMultiple resin systems availableChemical compatibility dependent
MaintenanceLow corrosion-related maintenanceCoating deterioration may require attention
NEMA load classesAvailableAvailable depending on system
Fire-rated systemsProject/system dependentProject/system dependent
Custom fittingsAvailableAvailable

Standards, Compliance & Testing

Specify the applicable tested system and structural classification.

Compliance depends on the selected DMTRAY™ configuration and project requirements.

AS/NZS 3013:2005

Fire & Mechanical Performance

Fire-rated cable-support configurations should be assessed against the applicable tested system and installation arrangement.

NEMA FG 1

Fiberglass Cable Tray Systems

DMTRAY™ cable ladders are available in multiple structural classifications including 8A/FG1, 12C/FG1, 20C/FG1 and 30C/FG1.

AS 1530.3

Fire Hazard Properties

Current DMTRAY™ documentation identifies cable ladders as tested for fire-related performance and describes the product as self-extinguishing.

Choosing the Correct DMTRAY™ System

Cable tray selection requires more than nominating a width.

DM Composites can review cable tray schedules, layout drawings and specifications to assist with selection of the appropriate configuration.

Cable Type
Total Cable Weight
Future Cable Capacity
Tray Width & Depth
Support Spacing
Working Load
NEMA Class
Rung Spacing
Deflection Criteria
UV Exposure
Chemical Exposure
Marine / Coastal Exposure
Temperature
Electrical Requirements
Fire Performance
Resin System
Fittings & Covers
Expansion Requirements
Project Specification

Complete Cable Management Packages

More than individual lengths of FRP cable tray.

DMTRAY™ can be supplied as a coordinated package incorporating cable supports, fittings, accessories and project-specific components.

Cable Ladders
Cable Trays
Wireways
Horizontal Bends
Vertical Bends
Tees
Crosses
Reducers
Custom Bends
Splice Plates
Expansion Joints
Covers
Hold-Down Clamps
Divider Strips
Drop-Outs
Blind Ends
Installation Rungs
Wall Connectors
Support Systems
Fasteners
FRP cable trays installed within an underground tunnel

Technical Support

Information for engineers, electrical contractors and asset owners.

Available documentation can include the DMTRAY™ Product Guide, NEMA FG 1 classifications, load and span tables, dimensions, resin-system information, fire documentation, fitting drawings, splice-plate details, supports and accessories.

Frequently Asked Questions

FRP cable tray and cable ladder explained.

Common questions about NEMA classes, fire performance, resin systems, coastal use and cable-management configurations.

FRP cable tray is a cable-support system manufactured from Fibre Reinforced Polymer and used to support and route electrical, control, instrumentation and communications cabling.

Cable ladder uses side rails connected by spaced rungs for ventilation and access, while cable tray provides a more continuous support surface in solid or perforated form.

NEMA FG 1 is a standard addressing fiberglass cable tray systems. DMTRAY™ cable ladders are available in multiple NEMA FG 1 classifications.

The current range includes 8A/FG1, 12C/FG1, 20C/FG1 and 30C/FG1 cable ladder configurations.

DMTRAY™ has fire-performance options and supporting documentation depending on the selected system and resin configuration. Where AS/NZS 3013:2005 is required, the complete tested or certified configuration must be reviewed.

Standard FRP systems are electrically non-conductive. A specialised conductive resin system is also available where conductivity is specifically required.

Yes, appropriately specified FRP is particularly useful in coastal and marine environments because of its inherent corrosion resistance.

Yes. DMTRAY™ provides moulded and mechanically fabricated fittings, including custom and adjustable bends for project-specific cable routes.

Need FRP Cable Tray for Your Project?

Send us your cable schedule, drawings and project requirements.

Our team can review cable loads, widths, support spans, environmental conditions, fire requirements and project specifications to assist with selection of an appropriate DMTRAY™ system.